Setting the microwave
Example: microwave power 600 watts, 5 minutes
Press the required microwave power setting.
1.
The indicator light above the button lights up.
Set a cooking time using the rotary selector.
2.
Press the
¹
button.
3.
The cooking time counts down in the display.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or press
º
. The clock reappears.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 W, 25 minutes
Press the
l
button.
1.
The indicator light above the button lights up.
Press the required microwave power setting.
2.
The indicator light above the button lights up and 1:00 min
appears in the display.
Set the cooking time using the rotary selector.
3.
Confirm by pressing the
4.
The clock reappears. The setting is saved.
Notes
You can save the memory settings and start the appliance
■
immediately. When finishing, instead of pressing
.
¹
You cannot save several microwave power settings one after
■
the other.
l
button.
l
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the
º
Operation is suspended. The display above the
flashes. After closing the door, press the
Cancelling operation
Press the
º
button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.
Cooling fan
The appliance is equipped with a cooling fan. The fan may run
on even if the oven has been switched off.
Notes
The cooking compartment remains cold during microwave
■
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
Condensation may appear on the door window, interior walls
■
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
You cannot save automatic programmes.
■
Saving a new setting in the memory: press the
■
The old settings appear. Save the new programme as
described in steps 1 to 4.
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
Press the
1.
The saved settings are displayed.
Press the
2.
The cooking time counts down in the display.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or press
º
. The clock reappears.
Pausing
Press the
º
Operation is suspended. The display above the
flashes. After closing the door, press the
Cancelling operation
Press the
º
button once.
, press
button once or open the appliance door.
button twice or open the door and press the
l
button.
button.
¹
button once or open the appliance door.
button twice or open the door and press the
button
¹
button again.
¹
º
l
button.
¹
button
¹
button again.
º
23