Advertisement
Available languages
Available languages
Attention!
- The PCB is a very sensitive component. Please insert the PCIe card carefully and make sure it is
correctly aligned.
- Proceed with caution, as sharp edges inside the unit can cause injuries.
Follow the instructions below to pre-install the 2.5" NVMe or SATA SSD to the PCIe card
•
Carefully insert the 2.5" SSD into the U.2 connector on the PCIe board.
Note: Ensure the correct orientation of the U.2 / SATA connector.
Manual IB-PCI2017-U2
2,5 SSD/HDD
Advertisement
