Advertisement
PROBLEM
Accessories don't shut off when door
opened (key off)
Accessories shut off when passenger
door is opened. (for driver's door off
option).
Dome doesn't fade on and stays on
much longer than set delay
Dome always on with key on.
Dome doesn't delay after door close,
even though delay selected on
switches
Headlights are always on when key is
on
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or
problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization
number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA
number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number
where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no money. We will
bill you after repair.
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or
workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital's option.
This warranty does not cover nor extend to damage to the vehicle's systems, and does not cover removal or reinstallation of the product. This Warranty does not
apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or
accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to
the duration of this written warranty. Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24
months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with
the sale of this product.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to
CAUSE
Door switch not connected to ground
or wire broken
IGNITION wire being fed by
accessory relay
Wire from driver's door switch still
connected to dome light circuit
Driver's door switch and passenger
door switches still connected
Dome light still connected to door
switches.
Dash dome light switch on
Passenger or driver's door input is
shorted to ground
Switch settings need to be updated
internally
Light sensitivity adjustment too
sensitive
Sensor cannot get accurate reading
of light conditions
Sensor connection to PAC-1300 is
poor
SERVICE AND REPAIR
Dakota Digital 24 Month Warranty
SOLUTION
Check ground on door switch. Replace broken wire
to switch
Separate all accessory connections to relay from the
rest of vehicle circuitry move IGNITION wire to
location with +12V only with key on.
Cut wire between dome light and driver's door
switch. The only wire to driver's door switch should
be from the DVR DR terminal (for driver's door shut
off option)
Cut wire between driver's door and passenger door
switches.
Cut wire between dome light and door switches.
Turn off dome light switch
Check wire for short and replace/reroute wire to fix
short
Cycle key to on then back off.
Readjust sensitivity pot to desired light level
Ensure that sensor is mounted in dash aimed toward
windshield and that it is not covered up.
Check for and repair broken connections from
sensor to PAC-1300. Ensure that both sensor wires
go to PAC-1300 sensor terminals.
www.P65Warnings.ca.gov
MAN# 650112
Advertisement
