Remote up/down dual window control or lock/unlock control (11 pages)
Summary of Contents for Dakota Digital PAC-1300A
Page 1
PAC-1300A RETAINED ACCESSORY WITH DOME AND HEADLIGHT CONTROL Dakota Digital PAC-1300A HEADLIGHT CONTROLLER CUSTOM SETTING Headlight sensitivity adjust SWITCH CCW darker turn on point CW lighter turn on point Setup switches TO +12V FUSED TO CHASSIS GROUND SUN SENSOR TO RELAY (WHITE WIRE)
Page 2
OPERATION AND FEATURES • Automatic headlight feature The automatic headlight feature uses a signal from the supplied light sensor to turn the headlights on automatically when it becomes dark. The sensitivity of this sensor can be adjusted with the pot on the PAC-1300 module. After the key is turned off, this feature will keep the headlights on for the delay set by the selection switches.
Page 3
INSTALLATION NOTES (Continued): • The GREEN and RED wires of the accessory relay and the POWER terminal on the PAC-1300 should be connected, through a fuse, to a constant +12V circuit. There needs to be a constant 12 volts on these wires or the PAC-1300 will not function.
Page 4
Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.