Remote up/down dual window control or lock/unlock control (11 pages)
Summary of Contents for Dakota Digital PAC-2000
Page 1
PAC-2000 REV D ELECTRIC COOLING FAN CONTOLLER REV D PAC-2000 FAN CONTROLLER CUSTOM ADJUSTMENT +12 V with key ON A/C clutch cycle switch Choose (+12v trigger) option Not used in GAUGE below sender only application Fused battery 12V SENDER High...
Page 2
If a gauge is not used, ONLY a Dakota Digital 300°F sender should be used. Other senders may not give a correct reading to control unit.
Page 3
Option no gauge, dedicated Dakota Digital sender only Dakota Digital individual temp gauge with sender Dakota Digital instrument cluster with control box (ver. STR-D or later, older versions use CUS) Stewart Warner gauge and sender Classic gauge and sender VDO gauge and sender...
Page 4
The current temperature reading can be displayed on the unit at anytime during normal operation, without going into the diagnostic mode. Simply press and hold SW1 while the key is on and the PAC-2000 is not in setup or diagnostic mode.
Hold SW1, if temperature read is lower than expected or (gauge setup) doesn’t match gauge, redo setup. Wrong sender used For sender only applications ONLY a Dakota Digital (for no gauge setup) 300°F sender can be used. Other senders may not give a correct temperature reading.
Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.