To Exit Teletext; To Display The Time - Toshiba 23WLT46B Owner's Manual

• Press “ “ button.
• Select the required subcode page num-
ber by pressing four digit buttons (e.g.
0001).
• If the selected subcode page is not dis-
played in a short time, press “
ton. TV programme will be displayed on
the screen.
• Teletext page number will be displayed
on the upper left corner of the screen
when the selected page is found.
• Press “ “ button to display the se-
lected Teletext page.
DÃÃ
Fastext
(This is applicable if your TV is equipped with
FASTEXT feature)
Your TV supports the 7 page Teletext system.
When the page number of any of the 7 pages
in memory is entered, the system will not
search for the requested page; instead it will
display the page automatically.
• Press “P/CH +” button to move the Tele-
text screen forward one page at a time.
• Press “- P/CH” button to move the Tele-
text screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
• Press an appropriate Red, Green, Yel-
low or Blue button in order to reach the
relevant page quickly.
56
For TOP text
TOP text mode of operation will be activated au-
tomatically according to the transmission.
• If TOP text transmission is present, colour
coded buttons will appear in status row.
“ but-
• If TOP text transmission is not present, status
row will not appear.
The subject-heading for information may be lo-
cated in coloured box.
In TOP mode the “P/CH
mands will request the next or previous page
respectively. If TOP text transmission is not avail-
able, in case of operation of these commands,
wraparound occurs. For example page 100 ap-
pears to be one greater than page 199.

To exit Teletext

• Press “TV” or “
switch to TV mode.

To Display the Time

• While watching a TV programme with Teletext
transmission press “
time information, captured from Teletext will be
displayed at the upper right of the screen until
the “ “, or “M” button pressed.
• If the programme being watched does not
have Teletext transmission, no information
will be displayed.
+“ or “- P/CH” com-
” button. The screen will
“ button. The current