Page 6
Screw cam bolts (B) into stand top (1). Insert dowels (A) into shelf (9), panels (3,4) and back panel (11). Screw cam bolts (B) into panels (3,4).
Page 7
Screw cam bolts (B) into panel (2). Insert dowels (A) into panel (2) and slat (19). Attach slat (19) to panel (2) using cam bolts and dowels as guides. Insert cam locks (C) into slat (19) and tighten with a screwdriver.
Page 8
Insert dowels (A) into legs (5,6,7,8). Screw cam bolts (B) into legs (5,6,7,8). Insert dowels (A) into slat (10). Attach slat (12) to slat (10) using screws (E). Attach door stopper (F) to slat (12) using screws (G).
Page 9
Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (3) and tighten with a screwdriver. Attach legs (7,8) to panel (4) using cam bolts and dowels as guides. Insert cam locks (C) into panel (4) and tighten with a screwdriver.
Page 10
Attach panel (2) and shelf (9) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (2) and shelf (9) and tighten with a screwdriver. Two cam locks (C) will be inserted into panel (2) and into shelf (9). Attach slat (10) to leg (5) using cam bolt and dowel as guides.
Page 11
Insert cam locks (C) into panel (2), shelf (9) and slat (10). Attach panel (4) to panel (2), shelf (9) and slat (10) using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver. Attach back panels (11,15,16,17,18) to the frame assembly using bolts (H). Tighten bolts (H) with wrench (R).
Page 12
Insert cam locks (C,D) into the frame assembly. Attach stand top (1) to the frame assembly using cam bolts and dowels as guides. Tighten cam locks (C,D) with a screwdriver. Cover all visible cam locks with stickers (T) as desired.
Page 13
Cover all visible bolts with stickers (T) as desired. Insert plastic pivots (Q) into panel (2) and slat (10).
Page 14
Attach door hinge (P) to door (13) using screws (J). Attach door hinge (N) to door (14) using screws (J). Attach handles (K) to doors (13,14) using Attach handles (U) to doors (13,14) using handle bolts (L). Attach door stopper plates handle bolts (V).
Page 15
Insert door hinge (N) into bottom left plastic pivot (Q). Slide door (13) into place, inserting flange of door hinge (P) into top left plastic pivot (Q). Secure door hinge (N) to door (13) using screws (J). Insert door hinge (P) into bottom right plastic pivot (Q).