Buttons And Lights On The Control Panel; Buttons - Epson B11B248401 User Manual

User's Guide

Buttons and Lights on the Control Panel

Buttons

A
Power button
B
Double feed detection skip button
C
Slow mode button
D
Stop button
E
Start button
Related Information
"Placing Plastic Cards" on page 31
&
Scanner Basics
Turns the scanner on or off.
Normally, an error occurs when detecting double feeds
when loading envelopes, plastic cards, originals with labels
or stickers, and so on. Press the
to skip this error once (one sheet). The light is on when this
is enabled. Follow the steps below to restart scanning when
a double feed error has occurred (the error light flashes).
1. Open the scanner cover, and then remove the originals.
2. Close the scanner cover, and then press the
3. Load the originals.
4. Restart scanning by pressing the start button or the
software button.
Slow down the feeding speed when scanning. The light is on
when this is enabled.
Press this button in the following situations:
❏ when originals jam frequently
❏ when loading thin originals
❏ Cancels scanning.
❏ Finishes Automatic Feeding Mode.
❏ Starts scanning.
❏ Press this when cleaning the inside of the scanner.
12
button before scanning
button.