Download Print this page
Ninja JC101WBKT Quick Start Manual

Ninja JC101WBKT Quick Start Manual

Cold press juicer

Advertisement

Quick Links

Disassembly
1.
Press and HOLD the RELEASE button
while turning the feed chute chamber
clockwise and remove from motor base.
Cleaning
IMPORTANT: DO NOT add water to the feed chute while the unit is operating to clean the unit.
Using the Cleaning Brush
Use the end of the cleaning brush to clear
any buildup left over after juicing.
Dishwasher
All parts, except the motor
base, are dishwasher safe.
For questions or to register your product, visit us online at ninjakitchen.com
© 2020 SharkNinja Operating LLC.
NINJA is a registered trademarks of SharkNinja Operating LLC.
JC100Series_QSG_MP_Mv10
2.
Remove the pulp spout from the feed
chute chamber by turning clockwise.
Then, remove the filter and auger.
Use the bristle side of the cleaning
brush to clean the filter, if needed.
Hand-Washing
Wash parts in warm, soapy water.
Use the included cleaning brush for
hard-to-clean areas, such as the filter.
@ninjakitchen
Please make sure to read the enclosed Ninja® Owner's Guide prior to using your unit.
COLD PRESS
JUICER
What's in the Box
A
A
Main Body
E
Juice Jug
B
Tamper
F
Auger
C
Food Tray
G
Black Filter
(no pulp)
D
Feed Chute Chamber
Using the Filters for Pulp Control
Control the amount of pulp by choosing the desired filter.
Use the black filter with the finest
Use the gray filter* with the larger
mesh for juice with no pulp.
mesh for juice with some pulp.
*Not available with all models
Using the Control Panel
START/STOP
Press once to start continuous
running up to 12 minutes;
press again to stop.
QUICK START
GUIDE
B
C
G
F
J
D
H
I
E
Gray Filter
H
(some pulp)
(not available
with all models)
I
Orange Filter
(lots of pulp)
Use the orange filter with
the largest mesh for juice
with lots of pulp.
REVERSE
If the feed chute chamber becomes blocked or ingredients
are not processing, press and hold REVERSE. There will be
a beep and a brief pause, then the auger will rotate in the
opposite direction. Release REVERSE to stop. Repeat as
needed. Press START/STOP to resume normal operation.
L
K
Pulp Spout
J
K
Pulp Container
L
Cleaning Brush

Advertisement

loading

Summary of Contents for Ninja JC101WBKT

  • Page 1 Disassembly Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit. QUICK START COLD PRESS GUIDE JUICER What’s in the Box Press and HOLD the RELEASE button Remove the pulp spout from the feed while turning the feed chute chamber chute chamber by turning clockwise.
  • Page 2 Assembly Juicing 101 Use the freshest and ripest fruits and vegetables, and wash them prior to juicing. Always turn on the juicer before adding ingredients to the feed chute. Align the metal portion Add ingredients gradually, making sure all of them have been processed/moved of the filter with the bottom of the auger.