Table of Contents
Advertisement
Universal Remote Setup
Screen Menu >
System
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home
theatres, and other third-party external devices connected to the TV using the TV's remote control.
You can also use the Anynet+ (HDMI-CEC) function to operate Samsung external devices with your
TV's remote control without any additional setup. Refer to the "Anynet+ (HDMI-CEC)" for more
information.
Some or new models of the external device connected to the TV, may not be supported from the
Universal Remote
Setup.
Connecting the IR Extender
Plug the cable into the One Connect IR connector and then point the transmitter at the other end of
the cable towards the external device's remote panel receiver. However, there can' be any obstacles
between the IR extension cable and the external device. The presence of an obstacle will interfere with
the transmission of the remote panel signal.
"
The colour and design of the IR Extender may vary depending on the model.
Add the External Device
11
Turn on the external device you wish to set up universal remote function for and then press
SOURCE
to bring up the
21
Universal remote setup
Select
setup process.
31
Follow the on-screen instructions for the Universal remote setup. If it does not respond properly,
set up the remote control by entering the model number manually.
Device Manager
>
>
Source
screen.
from the top of the screen. This initiates the universal remote
Universal Remote Setup
Try Now
Advertisement
Table of Contents
