Table of Contents
Advertisement
•
Place the handset to the charging
cradle.
Note
•
Placing the handset to the base station or charging
cradle does not end the call when the auto hangup
feature is turned off (see 'Activate/Deactivate auto
hang up' on page 21).
Adjust the earpiece/speaker
volume
Press
/
to adjust the volume during a call.
» The earpiece/speaker volume is
adjusted and the phone is back to the
call screen.
Mute the microphone
1
Press
during a call.
» [Mute on] is displayed on the handset.
» The caller cannot hear you, but you
can still hear his voice.
2
Press
again to unmute the microphone.
» You can now communicate with the
caller.
Turn the speaker on or off
Press
.
Make a second call
Note
•
This service is network dependent.
1
Press
during a call.
» The first call is put on hold.
2
Dial the second number.
» The number displayed on the screen is
dialed out.
Answer a second call
Note
•
This service is network dependent.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1
Press
and
» The first call is put on hold, and you
are now connected to the second call.
2
Press
and
answer the first call.
Switch between two calls
Note
•
This service is network dependent.
You can switch your calls in these ways:
•
Press
and
•
Press [Option] and select [Switch calls],
then press [OK] again to confirm.
» The current call is put on hold, and you
are now connected to the other call.
Make a conference call with
the external callers
Note
•
This service is network dependent. Check with the
service provider for additional charges.
to answer the call.
to end the current call and
; or
EN
11
Advertisement
Table of Contents
