Cisco MERAKI MS355 Series Installation Manual page 3

Ports and Status Indicators
The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash
twice. Additional functions are described below, from left to right.
Front Panel Components
Item Function
1 Power
2 Switch Ports
Additionally, there is a RESTORE button available on the back panel.
Insert a paperclip if a restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
LED Status Meaning
Solid orange Switch is unable to connect to the Meraki cloud
Flashing white Firmware upgrade in process
Solid white Switch is fully operational and connected to the Meraki cloud
Off Switch does not have power
Off No client connected
Solid orange 10/100 Mbps (1000 Mbps on SFP+)
Solid green 1000/2500/5000/10000 Mbps (10000 Mbps on SFP+)
3