Daikin Intergas Altherma Hybrid User Reference Manual page 20

4 | Operation
To set the overrule period
User reference guide
20
Situation
15:20
18.0°C
15:20
19.0°C
If user profile = Detailed, then you can:
▪ Temporarily overrule the room temperature schedule by pressing
as if user profile = Basic)
▪ Change the mode from scheduled to a preset value by pressing
Situation
18.0°C
Scheduled
Mon 17:00
18.0°C
Scheduled Scheduled
Mon 17:00 Mon
18.0°C
Scheduled Scheduled
Mon 17:00 Mon
20.0°C
Scheduled Scheduled
Mon 17:20 Mon
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.2]: > User settings > Temperature lock.
2 Select a value and press
▪ Permanent
▪ hours (2, 4, 6, 8)
15:20 => Scheduled temperature =
preset value (Eco (heating)) = 18°C.
You temporarily overrule the schedule.
Desired temperature = custom
temperature = 19°C.
At the next scheduled action (17:00),
the schedule will be used again.
15:20 Room temperature schedule is used.
15:20 => Desired temperature = preset
value (Eco (heating)) = 18°C.
The next scheduled action is at 17:00
and the desired temperature will then
increase.
19.0°C
You temporarily overrule the schedule.
Desired temperature = custom
temperature = 19°C.
17:00
At the next scheduled action (17:00),
the schedule will be used again.
20.0°C
You change the mode from scheduled
to preset value (Comfort
(heating)).
17:20
Desired temperature = preset value
(Comfort (heating)) = 20°C.
After 2 hours, the schedule will be used
again (17:20 => 20°C).
21.0°C
Before you have changed the mode
from scheduled to preset value, and
now you temporarily overrule the
17:20
preset value.
Desired temperature = custom
temperature = 21°C.
After 2 hours, the schedule will be used
again (17:20 => 20°C).
:
Description
or (same
or
Description
EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
4P556862-1A – 2020.10