Daikin Intergas Altherma Hybrid User Reference Manual page 19

To change the mode from scheduled to preset value
Example: Temporarily overruling the schedule AND changing the mode to preset value
EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
4P556862-1A – 2020.10
3 Use or to adjust the temperature.
Result: The room temperature follows the manually adjusted value ( ), but will
return to the scheduled value at the next scheduled action.
Prerequisite: User profile = Detailed.
1 Go to the room temperature home page (Room).
2 Press or to select a preset value ( or ).
Result: The room temperature follows the preset value (Comfort or Eco),
but will return to the scheduled value after the overrule period
(= Temperature lock: 2/4/6/8 hours or permanent).
3 If necessary, you can overrule the preset value by using
temperature.
Result: The room temperature follows the manually adjusted value ( ), but will
return to the scheduled value after the overrule period (= Temperature
lock: 2/4/6/8 hours or permanent).
You have configured the following settings:
Settings
Preset values Comfort (heating) =
20°C
Eco (heating) = 18°C
Schedule 07:00 Comfort
09:00 Eco
17:00 Comfort
19:00 21°C
23:00 Eco
Overrule period 2 hours
(Temperature
lock)
If user profile = Basic, then you can temporarily overrule the room temperature
schedule by pressing or .
4 Operation
|
or to adjust the
Description
Desired temperature when you
are at home.
Desired temperature:
▪ When you are away
▪ During the night
You are at home.
Desired temperature = preset
value (Comfort (heating)).
You are away.
Desired temperature = preset
value (Eco (heating)).
You are at home.
Desired temperature = preset
value (Comfort (heating)).
You are at home and want it to
be a little warmer.
Desired temperature = custom
temperature.
Desired temperature = preset
value (Eco (heating)).
If you temporarily overrule the
schedule by a preset value, after
2 hours the schedule will be used
again.
User reference guide
19