Advertisement
SPECIFICATIONS
Clamp Capacity
Adjusts
Maximum Jaw Opening
Maximum Vise Travel
Jaws
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the parts
listed in the following pages, refer to the Assembly
Diagram near the end of this manual.
1.
Connect the Clamp to a work surface.
The work surface must be able to hold the combined
weight of the Vise and intended workpieces.
2.
For heavy duty use or long term installation,
mount the Vise directly to the work surface. Use
the holes in the Vise as a template to mark the
work surface. Verify that installation surface has
no hidden utility lines before drilling or driving
screws. Drill holes and attach the Vise firmly to
the work surface with appropriate hardware.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
1.
Choose the Jaws that are most
appropriate for the job.
2.
Loosen the T-handles and turn the Vise in the
best position for the job. Tighten the T-handles.
3.
Turn the Handle to open the Jaws of the
Vise. Place the workpiece between the Jaws
and close the Vise. The Jaws can damage
soft workpieces, do not overtighten.
4.
Clean, then store the product indoors
out of children's reach.
Item 97160
Tables up to 1.37 IN. Thick
360° at Base and Jaw
2.25 IN.
2.25 IN.
2.5 IN. L x 0.59 IN. H
For technical questions, please call 1-888-866-5797.
MAINTENANCE AND SERVICING
CAUTION
Damaged products can fail, causing personal
injury. Do not use a damaged product. If
abnormal noise or vibration occurs, have the
problem corrected before further use.
1.
BEFORE EACH USE, inspect the general
condition of the product. Check for loose
screws, misalignment or binding of moving
parts, cracked or broken parts and any other
condition that may affect its safe operation.
2.
AFTER USE, clean external surfaces
of the product with clean cloth.
3.
Keep the Vise well lubricated. Clean
Jaws to prevent soiling workpieces.
Replacing the Jaws
To replace or attach different jaws. Use a screwdriver
to remove the screws in the face of the jaw.
Attach the new jaws with the same screws.
PLEASE READ THE FOLLOWING
CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO
THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT
BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Product's Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
Specify UPC 193175412348 when ordering parts.
Page 3
Advertisement
