Advertisement
IMPORTANT SAFETY
INSTRUCTIONS
WARNING! Read all instructions
Failure to follow all instructions listed
below may result in serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
1.
Keep children and bystanders away
while operating. Distractions can
cause you to lose control.
2.
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
PERSONAL SAFETY
1.
Wear ANSI-approved safety goggles, NIOSH-
approved dust mask/respirator, and heavy-
duty work gloves during installation or
during use, when conditions warrant.
2.
Stay alert and use common sense when
operating. Do not use when tired or under the
influence of drugs, alcohol or medication.
3.
Do not overreach. Keep proper footing
and balance at all times. This enables
better control in unexpected situations.
4.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
PRODUCT USE AND CARE
1.
This product is not a toy. Keep
it out of reach of children.
2.
Use the correct product for your application.
The correct product will do the job better and
safer at the rate for which it was designed.
Do not modify this product or use it for a
purpose for which it is not intended.
3.
Check for misalignment or binding of moving
parts, breakage of parts and any other condition
that may affect the product's operation. If
damaged, have the product repaired before use.
4.
Use the product in accordance with these
instructions and in the manner intended for the
particular type of product, taking into account the
working conditions and the work to be performed.
Use of the product for operations different from those
intended could result in a hazardous situation.
Item 97160
For technical questions, please call 1-888-866-5797.
SERVICE
1.
Have product serviced by a qualified repair person
using only identical replacement parts. This will
ensure that the safety of the product is maintained.
2.
Maintain labels and nameplates on the
product. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
MISCELLANEOUS
1.
Keeps hands clear while closing.
2.
Jaws can damage workpieces. Do not
overtighten. Keep the face of the Jaws clean.
3.
Vise may chip if struck with another hardened
tool, damaging Vise and possibly causing
injury. Inspect before use; discard if chipped.
4.
The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.
Page 2
Advertisement
