Tools And Materials; Before You Begin - Kohler C3-420 Installation Instructions Manual

Tools and Materials

Before You Begin

WARNING: Risk of electric shock. Connect only to a circuit protected by a
Class A Ground-Fault Circuit-Interrupter (GFCI)*, which protects against line-
to-ground shock hazard. Use 120 V, 60 Hz, 15 A service.
WARNING: Risk of electric shock. Do not immerse or flush the product with
water.
CAUTION: Risk of product damage. Do not install this product in a location
exposed to excessive moisture where condensation might form on the product
surface. Provide adequate ventilation when bathing to avoid damage to the
electronic components due to high humidity levels.
CAUTION: Risk of product damage. Do not supply electrical power to the
unit until the plumbing installation work has been completed, as it may cause
the product to malfunction.
CAUTION: Risk of property or product damage. Pushing or pulling on the
water connection may cause water leakage.
NOTE: The thermal protectors may trip during storage or transportation in warm
weather causing the unit to not operate. Allow the unit to cool to room temperature
before installation or operation.
Follow all local plumbing and electrical codes.
Connect the seat to a cold water supply of drinking quality with a pressure of 20 psi
(139 kPa) - 80 psi (551 kPa).
*Outside North America, this may be known as a Residual Current Device (RCD).
1354689-2-D
Plastic Wrap
2 Kohler Co.