Epson PhotoPC 3000Z Manual page 13

2. Open the camera's connector cover and connect the black
end of the video cable to the AV Out port, as shown below:
3. Connect the yellow end of the video cable to the
VIDEO IN port and the white end of the cable to the
AUDIO IN port on the TV, VCR, or projector.
4. Turn on the TV (and VCR) or video projector and switch
to video mode.
5. Turn the camera dial to
The last image that you uploaded to the camera is projected.
If you are using the optional AC adapter, you can also see
the image on the LCD screen.
You can use the camera's slide show feature to play your
images and sounds automatically, or play them one at time
using the navigation buttons. You can use all of the camera's
other playback features to show your presentation.
NOTE
If you are powering your camera with batteries, the LCD screen
is blank when the camera is connected to a video device. The
LCD screen remains lit if you use the camera with the optional
AC adapter.
6. When you're done playing back pictures, turn your camera
off and turn off the TV (and VCR) or video projector.
Then disconnect the cables.
TIP
You can videotape your pictures, sounds, and videos to share them
without using a computer. After you connect the camera to a VCR,
press the Record button on the VCR and play back a video clip.
.
Getting Pictures into Your Computer
When you're finished taking pictures, you can connect the
camera to your computer and transfer the images. If you have
the optional universal AC adapter, you can extend battery life
by using it when you connect the camera to your computer.
Connecting to a Windows PC with the
Serial Cable
Follow these steps to connect the camera to your Windows
PC:
1. Locate the PC serial cable that came with the camera.
2. Turn off the camera and your computer.
3. Locate a serial port on the back of your computer. You may
have two serial ports labeled COM1 and COM2, or the
ports may be labeled with icons. If you have two serial ports
available, use COM1 (port 1).
NOTE
If you have a 25-pin serial port, you can use a 9- to 25-pin adapter.
4. Line up the serial connector on the cable with one of the
serial ports on your computer, and insert the connector.
Then tighten the screws.
5. Open the connector cover on the side of the camera.
Carefully insert the connector on the other end of the cable
into the camera's interface port.
NOTE
To disconnect the cable from the camera, squeeze and hold the
connector lock button on the side of the connector while you pull
the cable out.
6. Turn on the camera and turn the camera dial to
turn on your computer system.
4/00
EPSON PhotoPC 3000Z
, then
EPSON PhotoPC 3000Z
- 13