Komatsu WA320-6 Shop Manual page 42

FOREWORD
12
Type 3
Disconnection
1. Hold the tightening portion and push body (9) in straight until
sliding prevention ring (8) contacts contact surface (b) of the
hexagonal portion at the male end. (Fig. 10)
2. Hold in the condition in Step 1 and push cover (10) straight until it
contacts contact surface (b) of the hexagonal portion at the male
end. (Fig. 11)
3. Hold in the condition in Steps 1 and 2, and pull out whole body (9)
to disconnect it. (Fig. 12)
Connection
1. Hold the tightening portion and push body (9) in straight until the
sliding prevention ring contacts contact surface (b) of the hexagonal
portion at the male end. (Fig. 13)
00-30
PUSH-PULL COUPLER
00
00
00
WA320-6