Usb 3.0 to 2.5" sata iii enclosure w/encryption (13 pages)
Summary of Contents for StarTech.com S251BU31REM
Page 1
2.5” SSD / HDD Mobile Rack for 3.5 / 5.25” Bay with Removable Enclosure - USB 3.1 (10Gbps) S251BU31REM *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com...
Page 2
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Table of Contents Introduction ....................1 Product diagram ............................1 Package contents ............................3 Requirements ............................. 3 Install a drive in the enclosure .............4 Attach the drive bay to the bracket ............4 Install the drive bay into a computer ..........5 Install the enclosure into the drive bay ..........6 About the LED indicators ..............6 Technical support ...................7 Warranty information ................7...
Introduction The S251BU31REM combines the benefits of a portable drive enclosure with the features of a drive bay, enabling you to swap, replace, or transport a drive, as well as store your drive in a fixed location. The portable drive enclosure features USB 3.1 (10Gbps) connectivity, providing fast performance and quick access to data.
Page 5
Front Drive bay Slot Adapter bracket Eject button Back SATA data connector SP4 Molex connector Instruction manual...
• Internal SATA port on motherboard or SATA controller card • Power supply with a Molex or SATA connector • Screwdriver The S251BU31REM is OS independent and doesn’t require any additional drivers or software. If you require additional drive enclosures, visit www.StarTech.com/S251BU31REMD...
Install a drive in the enclosure Warning! Drives should be handled carefully, especially when you transport them. If you’re not careful with your drives, you may experience lost or corrupted data. Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component.
Install the drive bay into a computer Warning! Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large, grounded metal surface for several seconds to discharge any built-up static electricity.
Install the enclosure into the drive bay • After the Drive bay is installed in your computer, carefully slide the Drive enclosure into the Slot on the front of the Drive bay. To remove the Drive enclosure, press the Eject button on the Drive bay and pull out the Enclosure.
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 11
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the S251BU31REM and is the answer not in the manual?
Questions and answers