Related Manuals for CADO AP-C710S
Summary of Contents for CADO AP-C710S
-
Page 1: Table Of Contents
Air Purifier AP-C710S Instruction Manual Table of Contents Safety Precautions Operating Precautions Installing the Unit Parts and Functions Installing the Deodorizing/Dust Collecting/Anti-Bacterial Filter How to Operate Maintenance Troubleshooting Specifications... -
Page 2: Safety Precautions
Safety Precautions Make sure you observe these safety precautions. Important information is printed on the product and in this instruction manual in order to prevent damage to property or prevent harm to the user or other people. Make sure you fully understand the following content (display/graphic symbols) before reading this text. If you ignore these precautions, it may cause serious injury by fire or electric shock. - Page 3 Required Plug the power plug in all the way. In case of an abnormality or malfunction, immediately stop its operation and unplug the power plug. If it is not plugged in all the way, it may cause electric If you continue operations during a malfunction, it may lead shock or fire.
-
Page 4: Operating Precautions
Operating Precautions Do not block the air inlet or air outlet. Do not use the unit near a TV or radio. It may reduce the cleaning capability of the unit causing It may cause distortion of video images or noise. clean air not to circulate throughout the entire room. -
Page 5: Parts And Functions
Parts and Functions Cover stopper (ones on Illumination the left and right side) intensity sensor Top cover ☞ page 5 Control panel Ribbon ☞ page 7 PM2.5 indicator ☞ page 5 Deodorizing/ dust collecting/ anti-bacterial filter Odor sensor (removes dust and (placed inside the odor particulates) unit) - Page 6 Photocatalytic Lamp PM2.5 Indicator The blue activated carbon in the deodorizing/dust collecting/ The PM2.5 indicator in this product measures and displays the anti-bacterial filter does not use the conventional ultraviolet ray number of PM2.5 microscopic particulates (a rough indication) reaction type, but instead uses a new type of photocatalytic suspended in the air using a simple method.
-
Page 7: Installing The Deodorizing/Dust Collecting/Anti-Bacterial Filter
Installing the Deodorizing/Dust Collecting/Anti-Bacterial Filter Note Open the top cover. If the filters are in backwards, photocatalyst cleaning will not be effective. Slide the cover stopper on each side of the unit to open the top cover. Close the top cover. Remove the deodorizing/dust collecting/anti-bacterial filters from the polythene bag and place them inside the unit. -
Page 8: How To Operate
How to Operate Illumination intensity sensor Filter replacement indicator Air volume indicator ☞page 5 ☞page 9 Mode indicator Timer indicator High Rapid Middle Automatic Power Mode Air volume Timer Light button button button button button Starting the Unit Changing the Air Volume Plug the power plug into the wall outlet. -
Page 9: Maintenance
Maintenance Notes when Cleaning ◦ Before cleaning, make sure to remove the power cord from the wall outlet. ◦ When wiping the unit, always use a soft cloth or cotton swab. Using a stiff brush or something similar may scratch or damage the unit. ◦... - Page 10 Dust Sensor Replacing the Deodorizing/Dust Collecting/Anti-bacterial Filter If dust builds up, the sensor sensitivity will become unstable. Remove dust every two months or so. Clean the dust sensor The deodorizing/dust collecting/anti-bacterial filter cannot be washed with water. Replace it regularly. often when using in an environment with excessive dust.
-
Page 11: Troubleshooting
Troubleshooting Situation Points to check and how to handle Reference pages There is no air volume. Is the power cord plugged into the wall outlet correctly? → Plug the power cord into the wall outlet. The air volume is too weak. Did you remove the deodorizing/dust collecting/anti-bacterial filter from the polythene bag when you installed it? →... - Page 12 Situation Points to check and How to handle Reference pages The air purifying effect was not Is the unit placed in a location with bad air circulation such as in an area achieved. completely surrounded by something? → Make sure unit is located at least 30 cm away from walls, furniture, curtains, etc.
-
Page 13: Specifications
Specifications Model name AP-C710S Singapore model: 220-240V 50-60Hz India model: 240V 50Hz Power Hong Kong model: 220V 50Hz Applicable floor area (m Air volume/Operation Middle High Rapid (2 hours) mode Power consumption (W) Air volume (m Operational noise (dBA) Dimensions (mm) Width 423 ×... - Page 16 JA-00013-0201...