Advertisement
Quick Links
StudioPro 5 Channel DMX Digital Decoder
The StudioPro 5 Channel DMX Digital Decoder - 8A per Channel is a five channel DMX
controller with RDM compatibility and a wide array of configuration options. It accepts 12-24V
DC input voltage range at eight amps per channel maximum current and can support a wide
variety of LED installations. The digital display allows for easy configuration of the DMX
address, number of output channels, PWM frequency, bit-rate and dimming curve. DMX
connection options include 5-pin XLR, RJ45 and terminal blocks for input and output.
Features
• Digital readout legibly displays the DMX address, which is useful in dimly lit rooms.
• Easily change DMX address without DIP switch math.
• PWM frequency is adjustable from 500Hz to 30kHz for flicker-free performance in any
application.
• Switchable output smoothing, 8-bit or 16-bit.
• Adjustable number of output channels. See page 3.
• Configurable DMX modes, including 8/16-bit inputs and master controls. See pages 4-5.
• 12-24V DC input range.
• High 5 x 8A current capacity means it can drive up to 480W/960W per receiver at
12V/24V respectively.
• Adjustable dimming curve for a best fit for your application.
• Uses 5-pin XLR, RJ45 and terminal block connectors for DMX communication.
• Mounting tabs are integrated into the rugged chassis.
Copyright EnvironmentalLights.com
- 8A per Channel
Part number: DMX-5-8A
11235 West Bernardo Court, Suite 102
San Diego, CA 92127
Fax: 707-281-0567
EnvironmentalLights.com
All Rights Reserved 10/1/18
888-880-1880
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EnvironmentalLights.com DMX-5-8A
Summary of Contents for EnvironmentalLights.com DMX-5-8A
- Page 1 StudioPro 5 Channel DMX Digital Decoder - 8A per Channel Part number: DMX-5-8A The StudioPro 5 Channel DMX Digital Decoder - 8A per Channel is a five channel DMX controller with RDM compatibility and a wide array of configuration options. It accepts 12-24V DC input voltage range at eight amps per channel maximum current and can support a wide variety of LED installations.
-
Page 2: Specifications
1. Confirm that the power supply voltage matches the LED voltage and that the power supply is unplugged. 2. Connect the LEDs and power supply to the DMX-5-8A using the screw terminals. Power supply positive and ground should be connected to “V+” and “GND” terminals respectively. -
Page 3: Operation
The Bit Depth setting controls the DMX output smoothing resolution, either 8-bit or 16-bit. The decoder provides output smoothing in 16-bit mode (default and recommended). This setting is different from 16-bit DMX input. 16-bit DMX input is set through the Decoding Mode. Copyright EnvironmentalLights.com All Rights Reserved 10/1/18... - Page 4 0.1-9.9. Values less than 1 give greater dimming precision at high brightness and values greater than 1 increase precision at low brightness. Human vision is more sensitive at low light levels, so values greater than 1 are most common. Copyright EnvironmentalLights.com All Rights Reserved 10/1/18...
- Page 5 Dimming output 3, 4 & 5 3, 4 & 5 3, 4 & 5 Micro-dimming output 2 Master dimming Master dimming Dimming output 3, 4 & 5 Strobe Micro-dimming output 3, 4 & 5 Copyright EnvironmentalLights.com All Rights Reserved 10/1/18...
- Page 6 Dimming output Micro-dimming Dimming output Dimming output output 2 Dimming output Dimming output Dimming output Dimming output Micro-dimming output 3 Master dimming Master dimming Dimming output Strobe Micro-dimming output 4 Dimming output Micro-dimming output 5 Copyright EnvironmentalLights.com All Rights Reserved 10/1/18...
-
Page 7: Safety Precautions
Once you have tested the system successfully, you are ready to install it. We recommend you install LEDs, electronic controls and dimmers in such a way that you have access to them in case they fail. All electrical components can fail. Copyright EnvironmentalLights.com All Rights Reserved 10/1/18...
Need help?
Do you have a question about the DMX-5-8A and is the answer not in the manual?
Questions and answers