Table of Contents
Advertisement
Chapter 12
5. Enter a percentage in the
usage reaches the alert level, a warning will be shown on the
Page. If you want to want receive the alert on your phone, enter your mobile phone
number in the
SMS Alert for Usage
6. Enable
Monthly Data Statistics
starts.
7. Enter the start date of the billing cycle in the
8. Click
Save
to save the settings.
12. 5. LAN Settings
12. 5. 1. Change the LAN IP Address
The router is preset with a default LAN IP 192.168.1.1, which you can use to log in to
its web management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
Follow the steps below to change your IP address.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Type in a new
IP Address
4. Select the
Subnet Mask
the IP address identifies the local IP subnet.
5. You can configure the router's
through which you can also access the web management page.
6. Leave the rest of the default settings as they are.
7. Click
Save
to make the settings effective.
Usage Alert
field.
to reset data statistics when the next billing cycle
>
Network
>
LAN Settings
as needed.
from the drop-down list. The subnet mask together with
Second IP
Specify Your Network Settings
field to prevent data overuse. When data
Start Date
field.
page.
and
Subnet Mask
Basic
>
Network Map
for LAN interface
56
Hide quick links:
Advertisement
Table of Contents
