Table of Contents
Advertisement
Symptom
Audio input contains
noise.
The focus can not be
able to be automati-
cally adjusted.
Cause/solution
• Check the following.
• Grounding of the camera, a switching hub or
peripheral devices are not done.
• The camera is used near an electrical power line.
• The camera is used near a device which produces
strong magnetic field or radio waves (such as near
a TV/radio antenna, a motor of an air conditioning
system, a transformer, etc.)
When audio input still contains noise even after
checking the above possibilities, use a powered
microphone or connect audio output with low output
impedance.
• In the following locations or with the following sub-
jects, the focus may not be able to be automatically
adjusted. In this case, manually adjust the focus.
• When the subject moves a lot
• When there are large changes to the lighting intensity
• When the light level is low
• When the subject or location is extremely bright or
reflective
• When viewing through windows
• When the front panel is in a locations where it can
easily become dirty
• Locations where there is not much contrast such as
a white wall
• When there is harsh flickering
25
Reference
pages
14
Operating
Instructions
(on the
Panasonic
support
website)
Advertisement
Table of Contents
