Table of Contents
Advertisement
TX-32LX500M / TX-32LX500A / TX-32LX500X / TX-26LX500M / TX-26LX500A / TX-26LX500X
8 Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be
adjusted by remote control in Service Mode.
8.1.
How to enter SERVICE 1
1. In main menu, move to choose sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.
2. Simultaneously press INDEX button on remote control and DOWN button [
8.2.
How to enter SERVICE 2
1. Enter the SERVICE 1 mode and press RED button into the end of SERVICE 1 mode.
2. Select the SD Auto Check.
3. Set the channel to CH99.
4. Press HOLD button on remote control.
Note:
To exit from Service mode, press N or Power button on remote control.
] on the TV set.
20
Advertisement
Table of Contents
