Table of Contents
Advertisement
Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can
be adjusted by remote control in Service Menu
How to enter into Service Mode
While pressing [VOLUME ( - )] button on the main unit, press the [RED] button on the remote control for 3 times within
2 seconds.
How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
CS Maintenance Menu
OPT
EDID CLK
DRV CHECK
Key Command
Press the ( / /
/
Press the OK button to change the adjustment values.
Press the RETURN button for return to the main menu.
) button to step up/down/right/left through the functions and adjustments
15
Advertisement
Table of Contents
