Redback E435C Operation Manual page 5

11. Do not transport this machine while
the power source is running.
12. Stop the machine and remove the
battery pack from the machine. Make
sure that all moving parts have come to
a complete stop
- whenever you leave the machine,
- before clearing blockages or
unclogging chute,
- before checking, cleaning or working
on the machine.
13. Do not tilt the machine while the
power source is running.
Maintenance and Storage
1. When the machine is stopped for
servicing, inspection, or storage, or
when you need to change an accessory,
switch off the machine, remove battery
pack and make sure that all moving
parts have come to a complete stop.
Allow the machine to cool before making
any inspections, adjustments, etc.
Maintain the machine with care and
keep it clean.
2. Store the machine in a dry place out
of reach of children.
3. Always allow the machine to cool
down before storing it.
4. Replace worn or damaged parts for
safety. Use only genuine replacement
parts and accessories.
4
General Power Tool
Safety Warnings
The term "power tool" in the warnings
refers to your main-operated (corded)
power tool or battery-operated
(cordless) power tool.
Work Area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases, or
dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
Electrical Safety
1. Power tool plugs must match the
outlet. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce the risk of electric shock.
2. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or