Disposal - Redback E435C Operation Manual

charged and can be removed.
• LED flashes red - Battery fault or
overheat
Charging the Battery
1. Plug the charger into an AC outlet
100-250V (normal household voltage).
2. Insert the battery into the slots of the
charger and slide into place until the
battery locks into place
3. The LED will flash green while the
battery is charging.
- Once the battery is fully charged, the
LED indicator will show a steady green
light.

DISPOSAL

INFORMATION
GENERAL SAFETY
WARNING #5!
For EU countries only:
Do not throw electric power tools into
the household waste! In accordance
with the European Directive 2012/19/EC
on Waste Electrical and Electronic
Equipment and transposition into
national law, used electric power tools
must be collected separately and
recycled in an environmentally friendly
manner, same with devices,
accessories, and packaging. Plastic
14
parts are identified for recycling
according to material type.
Do not open disused batteries.
Accumuiators/batteries should be
collected, recycled or disposed of in an
environmentally friendly manner, too.
For EU countries only:
In accordance with Directive
2006/66/EC defective or used batteries
must be recycled.
Please ask your dealer about the
disposal
options!