The Series 1-S In Use - GKD 1S Series User Manual

THE SERIES 1-S IN USE

With the slew limits set and the key switch turned to the "Operational" position, slew movement will
only be allowed between the stored Left and Right slew limits.
As a limit is approached the Series 1-S system will apply the appropriate motion cut to stop slew
movement towards and through the limit. Slew movement back away from the limit will be allowed.
The two LED lamps alongside the Set Left and Set Right buttons will indicate motion cut status during
use. When a motion cut is applied, the LED associated with that direction of slew will turn RED.
When movement is allowed, the LED will show as GREEN.
Should the limits be set and the machine moved to a position outside the set limits with the key switch
in the "No Limits" position, when the key switch is turned to the "Operational" position the Series 1-S
will determine the shortest direction to be within the allowed limits and will only allow the machine
to move in that direction. Once the slew position is within the allowed zone, normal operation will
commence automatically.
www.gkdtec.com 7
M1000007 V1.3 - 05/2021