Switching Limits On And Off - GKD 1S Series User Manual

SWITCHING SLEW LIMITS ON AND OFF
Slew limits are enabled or disabled using the key switch on the front of the in cab display. The key switch
has three possible positions:
- No Limits
- Operational
- Set Limits
With the key switch in the "No Limits" position no slew limits are enabled and the machine will be free
to slew in both directions without interference from the 1SL system.
With the key switch in the "Operational" position, the stored Left and Right slew limits will be
activated. Slew movement of the machine will be limited to within the range between the stored
Left and Right slew limits. The key may be removed from the switch in the "Operational" position to
prevent the slew limits being altered or disabled.
www.gkdtec.com 5
M1000007 V1.3 - 05/2021