Fujitsu PRIMERGY TX300 S3 Service Supplement Manual page 22

Replacing the Power backplane
Figure 4: Removing the Power backplane
Ê Remove the screw (see the circle).
Ê Push the Power backplane in direction of the arrows until it gets out of the
PS cage guides. Take out the Power backplane.
Ê Insert the new Power backplane and push the Power backplane in direction
of the front side until it engages in the PS cage guides.
Ê Fasten the Power backplane with one screw in the PS cage.
Ê Push the PS cage into the bay. Make sure that the noses of the PS cage
engage in the chassis (for a detailed description see the Options Guide).
Ê Fasten the PS cage with four screws at the rear side of the server.
22
Guides
Service Supplement
Replacement routines
TX300 S3