Placing Originals On The Document Table - Epson GT-2500 Product Information

Epson GT-2500 and GT-2500 Plus
Placing Originals on the Document
Table
1. Open the ADF.
2. Place your document or photo on the document table, face
down on the glass. Make sure the top of the document or
photo is against the upper left corner of the document table.
4 - Epson GT-2500 and GT-2500 Plus
3. If you are scanning multiple documents or photos at once,
position each one at least 0.8 inches (20 mm) away from the
others.
4. Close the ADF gently so that your original does not move.
Note:
Always keep the document table and the underside of the ADF clean.
See page 9 for instructions.
Do not leave photos on the document table for an extended period of
time as they may stick to the glass.
7/06