Installing The Stand Or Wall Mount Bracket - Hisense B7100 User Manual

Installing the Stand or Wall mount bracket

Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the LED display, comes into contact with it. DO NOT exert pressure on
the front of the TV at any time because the screen could crack.
NOTE
Product images are only for reference, actual product may vary in appearance.
Follow the illustrations and textual instructions below to complete the installa-
tion steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent the TV from
being damaged or the screen from getting scratched.
2. Remove the Base Stand from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in accessory tightly.
43"/50"/55"
Base Stand
Screws：
（M4×20) × 4 (43")
(M4×12) × 4 (50")
(M5×12) × 4 (55")
2
Base Stand