Table of Contents
Advertisement
Operating the answer machine
Activating/deactivating call screening
While the caller is leaving a message on the answer machine, you can listen in via the loud-
speaker on the base or handset.
Permanently activating/deactivating call screening
¤
Menu
Answer Machine
Base
OK (
= on)
Call screening can be simultaneously activated on the base and handset.
Deactivating call screening on the handset for the current recording
Press the end call key. The loudspeaker on the handset is deactivated.
Setting up the answer machine
The answer machine has already been preset at the factory. You can configure individual set-
tings via the handset.
Setting up ring delay
You can set the amount of time that elapses before the answer machine is to accept a call.
¤
Menu
Answer Machine
No delay / 10 sec. / 18 sec. / 30 sec. / Auto Select and press OK (
With Auto the ring delay is as follows:
•
If there are no new messages, the answer machine answers a call after 18 seconds.
•
If new messages are present, the answer machine answers a call after 10 seconds.
Setting the message length
You can set a maximum message length.
The options are: 1 Minute, 2 Minutes, 3 Minutes or Unlimited.
¤
Menu
Answer Machine
length
OK (
Changing the language for the voice prompt and default announcement
¤
Menu
(
= German;
32
OK
OK
OK
= on)
= French;
= Italian)
Call Screening
OK
Ring Delay
OK
Message Length
Enter the digit for the desired language
OK
Handset /
= on).
OK
Select the message
Advertisement
Table of Contents
