Mounting
5.4 DIN rail mounting
The DIN rail mounting adapter and bracket holder are not included with the product, see
Accessories (Page 20).
Mounting
1. Screw (M4 x 20, tightening torque 1.8 Nm) the angle bracket
2. Place the device on the upper edge of the DIN rail
3. Press the device
42
1
against the DIN rail until the DIN rail slider catch locks in place.
onto the rear of the device.
.
Operating Instructions, 07/2021, C79000-G8976-C617-02
SCALANCE WxM766