Installing The Manuals; Turning The Projector On; Switching Between Image Sources; Adjusting Image Position - Epson PowerLite Pro G5150NL Quick Reference Manual

Installing the Manuals

1. Insert the projector CD in your
computer's CD or DVD drive.
(Double-click the Epson installer
icon, if necessary.)
2. Select your language, select
your projector model, then click
User's Guide, EasyMP Guide,
EMP Monitor Guide to install the
manuals. (If you are using Windows
and you don't have Adobe
click Adobe Reader to install it
also.) Then click Exit.
3. To view the manuals, double-click
the PL Pro G5000 Series User
Guide, EasyMP Operation Guide
(for G5150NL and G5350NL users
only), or EMP Monitor Operation
Guide (for Windows users only) icon
on your computer's desktop.

Turning the Projector On

1. Turn on your computer or image
source.
2. Remove the lens cover.
3. Press the power button. After
the power light stays green, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
just plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the User's Guide.
4. If you don't see your image, see

"Switching Between Image Sources"

or "Troubleshooting."
® ®
Reader ,
power button;
Switching Between Image
Sources

Adjusting Image Position

If the projector is mounted to the
ceiling, use the vertical lens shift dial
to move your image up or down or
use the horizontal lens shift dial to
move your image left or right. You
can also use the ceiling mount to
adjust the position.
Horizontal lens shift dial
Vertical lens shift dial
If the projector is on a table, place
it so it faces the screen as squarely
as possible. To raise the image, use
the vertical lens shift dial as shown
above. Or press the blue foot release
lever and lift the front of the projector
to extend the front adjustable foot.
Release the lever to lock the foot in
position.
You can fine-tune the height or level
the image by turning any of the
projector's adjustable feet. Use the
horizontal lens shift dial to move your
image left or right, as shown above.
Press the Source
Search button on the
projector
Press the Search button
or one of the Source
buttons on the remote
control