Advertisement
Quick Links
®
GalvinSafe
®
Rod, Axion
PRODUCT CODE:
Galvin Engineering: 190.81.12.32
HAWS: 8100-A
PRE - INSTALLATION
LOCATION OF UNIT: The Model 190.81.12.32 (8100-A) Emergency Shower should be
installed in close proximity to potential accident areas. It should be clearly identified, free
from obstructions and easy to access.
SUPPLY LINE: The minimum recommended line size is 1-1/4" BSPT with 210 – 600 kPa
flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended.
PLUMBING CONNECTIONS: Inlet supply is male 1-1/4" BSPT.
Free Standing Drench Shower, Pull
MSR ABS Shower (HAWS)
th
Version 3.1, 13
Aug. 2021, Page 1 of 6
Advertisement
Related Manuals for Galvin Engineering GalvinSafe 190.81.12.32
Summary of Contents for Galvin Engineering GalvinSafe 190.81.12.32
- Page 1 ® Rod, Axion MSR ABS Shower (HAWS) PRODUCT CODE: Galvin Engineering: 190.81.12.32 HAWS: 8100-A PRE - INSTALLATION LOCATION OF UNIT: The Model 190.81.12.32 (8100-A) Emergency Shower should be installed in close proximity to potential accident areas. It should be clearly identified, free from obstructions and easy to access.
-
Page 2: Parts Breakdown
ITEM CODE DESCRIPTION 190.92.00.10 SHOWER HEAD 190.92.04.30 VALVE ASSEMBLY EMERGENCY SHOWER SAFETY SIGN* 190.92.30.20 PULL ROD FLOOR FLANGE* STRIPE TAPE* 190.91.80.33 TEST TAG * spare parts will require special order or may not be available (contact Galvin engineering for more details). -
Page 3: Installation Procedure
Version 3.1, 13 Aug. 2021, Page 3 of 6 INSTALLATION PROCEDURE Refer to Installation Drawing for clarification. Check parts list to ensure all required parts are included. Use an AS 4020 approved pipe joint sealant on all connections. STEP 1: Prepare the emergency shower foundation by using the floor flange as a template. - Page 4 Version 3.1, 13 Aug. 2021, Page 4 of 6 Version 3, 30 June...
-
Page 5: Troubleshooting
Version 3.1, 13 Aug. 2021, Page 5 of 6 TROUBLESHOOTING PROBLEM REPAIR CHECKLIST 1. No Flow. Check the main shut-off valve. 2. a. Verify minimum 210 kPa flowing supply line pressure. 2. Insufficient water flow at shower b. Probable clogging of flow control inside shower head. -
Page 6: Warranty
April 2021, Page 6 of 6 The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.