Dvd/Cd Audio Operation; Cd Player User Interface; Direct Track Entry - Advent AMM12N Installation And Operation Manual

DVD/CD AUDIO OPERATION

Instructions for TFT control and Insert/Eject are the same for
DVD and CD operation. Please see the DVD/Disc Video
Operation section for information about these topics.
The AMM12N will play music or other audio files from the
following disc media/formats:
• CD-DA
• CD-R/RW
• DVD
• DVD+R/RW
• DVD-R/RW
Upon inserting a disc with the TFT screen open, the disc and
track title (if available), along with the track number and
playing time appear on the screen.

CD Player User Interface

The on-screen indicators and touch key areas for CD
playback are outlined below.
16 17 3 1 2
TRACK 01
DISC CD 1/10 01:23 04:31
1 Track 01
E
Q
2 Track 02
R
3 Track 03
E
A
4 Track 04
R
5 Track 05
P
I
6 Track 06
P
PS:
4 9 18 11 7
5
1. Current track and total number of tracks on disc
2. Elapsed playing time/length of track
3. Current track title
4. Available track titles
5. ID3 information
6. ||: Touch to pause/play disc playback
7. / : Touch to stop/resume disc playback
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
10. />>: Touch to navigate playlist during Stop or fast
forward during playback
11. /<<: Touch to navigate playlist during Stop or touch to
fast rewind or reverse during playback
12. Touch to activate/deactivate Repeat play mode
13. Touch to activate Random Repeat mode
14. Touch to access the direct entry screen
15. Touch to view the SETUP menu
16. Touch to view Spectrum Analyzer > Equalizer
17. Touch to view the SOURCE MENU and select a new
playback source
18. Touch the scroll bar and arrows to view the previous/
next page of songs
19. Current time
Controlling Playback
Stopping Playback
Touch the button on screen or press the
the remote control to stop disc playback.
To resume playback, touch the
the joystick button.
Pausing Playback
15 19
Touch the button on screen or press the joystick button to
suspend or resume disc playback.
Moving Through Tracks
01:53 PM
Press the >>| button (19) on the remote control or on screen
or use the > button on the joystick to advance to the next
14
track on the disc.
10
Press the |<< button (17) on the remote control or on screen
8
or use the < button on the joystick to move to the previous
track.
6
Repeat Playback
Touch the button on screen, press the RPT button on the
remote control (7) control panel (19) to alter repeat mode
13
12
according to the following:
• DVD: Repeat Chapter, Repeat Title, Repeat Off
• CD-DA: Repeat One, Repeat All, Repeat Off
• CD-R/RW: Repeat One, Repeat All, Repeat Off
• DVD-R/RW: Repeat One, Repeat All, Repeat Off
Track Scan Select (CD-DA discs only)
During disc play, press the SCN button on the remote control
(34) or control panel (20) to play the first 10 seconds of each
track. When a desired track is reached, press the SCN button
again to cancel the function and play the selected track.
Random Play Select
While disc play is stopped, press the RDM button on the
remote control (33) to play the tracks on the disc in a random,
shuffled order. Touch the RDM button again to cancel
Random Play mode.
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
Fast Forward
Touch the >> button on screen or press the /\ button on the
joystick to fast forward. Keep pressing and releasing the
button to increase the rate from "2X" to "4X", "6X", and "8X".
Fast Reverse
Touch the << button on screen or press the /\ button on the
joystick to fast reverse. Keep pressing and releasing the
button to increase the rate from "2X" to "4X", "6X", and "8X".

Direct Track Entry

button (20) on
To select a track directly, touch the
button on screen or press
display the direct entry menu.
Enter the desired track number using the on-screen number
pad, and then press the Enter (arrow) button. To exit the
screen without making a selection, touch Exit. To clear your
entry and start over, touch Clear.
28
AMM12N
button on screen to
TRACK: _ _ / ##
1 2 3
Exit
6
4 5
7 8 9
0
Clear