Table of Contents
Advertisement
Adjusting the Picture
Follow the steps on the Quick Setup sheet to connect the projector to your equipment, turn it
on, and select the image source. Once you see your picture, you may need to make certain
adjustments.
Note: If you don't see a picture, or the picture doesn't look right, see page 34 for troubleshooting
instructions.
1. Rotate the focus ring to sharpen the picture, or the zoom ring to reduce or enlarge it.
2. If the image is not centered on the screen, use the horizontal and vertical lens shift dials
to adjust its position.
Note: The lens shift feature cannot move the image both horizontally and vertically by the full
amount. For example, if you have moved the image all the way up, then you cannot shift it all
the way to the right or left at the same time.
Focus and
zoom rings
Up
Down
Left
Zoom ring
Right
Using the Projector
Focus ring
13
Advertisement
Table of Contents
