Legamaster XTX-8600UHD User Manual page 21

7. TOUCH OPERATION
7.1. TOUCH USB CABLE CONNECTION
1. Connect the signal cable witch display, and then turn on the display.
2. Connect the USB cable with display and the computer; connect one side of USB cable (Type-B USB connector)
on the display side.
3. Connect the other side of USB cable (Type-A USB) to the USB port on computer. See picture below.
4. Then turn on the computer.
5. When USB cable connected, then wait for 5 seconds and the touch function is ready to go. It can be activated
by pen, finger, or any other pointer
Note: Windows 10 is required for differentiation between pen, touch and palm input devices.
TOUCH OPERATION
XTX-8600 – USER MANUAL – ENGLISH
21