Table of Contents
Advertisement
T
ROUBLE SHOOTING GUIDE
If a problem occurs check below to see whether this can be solved.
In the unlikely event that the problem cannot be rectified, please contact a
service engineer.
Problem
No lights come on when
the power is turned on.
The machine does not
start.
The spray arms do not
rotate smoothly.
White deposits are left
on the dishwasher after
washing.
Streaks are left on
glassware.
Dry results are not
satisfactory.
Washing results are not
satisfactory.
Possible Causes
• Plug is not properly inserted into
the socket.
• Fuses blown or circuit breaker
tripped.
• The electricity of the house was
cut off.
• Door is not fully closed.
• The start button is not pressed.
• The mounting of the spray arms is
blocked by food particles.
• The amount of detergent or rinse-
aid set incorrectly.
• Too little Rinse-Aid dispensed.
• Too little Rinse-Aid dispensed.
• Incorrect amount of detergent.
• Utensils incorrectly arranged or
overloaded.
• Filters are clogged.
• Water jet holes of spray arms
blocked.
• Spray arm's rotation obstructed by
utensils.
• Unsuitable program selected.
23
23
Solution
• Check the plug.
• Check the electricity.
• Call for service.
• Close the door.
• Press the start button.
• Clean the holes of the
spray arm.
• Check the detergent
or rinse-aid.
• Fill the rinse-aid.
• Adjust the level of
rinse-aid container.
Advertisement
Table of Contents
