BMW R nineT 2020 Rider's Manual page 134

128 MAINTENANCE
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasten-
ers work loose
Always have the security
of the fasteners checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Clean the wheel centring
spigot and the contact
surfaces of the wheel hub.
ATTENTION
Use of hard or sharp-edged
objects in proximity to com-
ponent
Component damage
Take care not to scratch
components; cover or mask
as necessary.
Seat the rear wheel on the
rear-wheel adapter.
Install screws 1.
Rear wheel to wheel
carrier
Tightening sequence: Tighten
in diagonally opposite se-
quence
60 Nm
Slip the silencer on to the
pipe at the exhaust-flow con-
trol valve.
Align silencer 3, hold retaining
plate 2 in position and install
screw 1, but do not tighten
the screw yet.