BMW R nineT 2020 Rider's Manual page 132

126 MAINTENANCE
Insert wheel speed sensor 3
into its bore and install
screw 1.
Wheel-speed sensor to
fork leg
8 Nm
Insert the sensor cable into
holders 2.
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to
delayed braking effect.
Before driving, check that
the brakes respond without
delay.
Operate the brake several
times until the brake pads are
bedded.
Tighten screws 1.
Wheel cover, front, to
forks
5 Nm
Remove the front-wheel
stand.
Extend the side stand.
Remove the rear-wheel stand.
Place the motorcycle on its
side stand.
Removing rear wheel
Lift the motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Engage first gear.
Install the rear-wheel stand
( 112).