Adjusting The Image; Focusing And Zooming Your Image - Epson PowerLite 9300i Quick Manual

EPSON PowerLite 9300i Projector
If you're using Macintosh OS X:
You may need to set up your system to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
select .
Displays
2. Make sure the
VGA Display
selected.
3. Click the (or
Arrange
Make sure Mirror Displays is checked
4. Make sure the
Mirror Displays
If you're using OS 8.6 to 9.x:
You may need to set up your system to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
or
Monitors Monitors and Sound
2. Click the icon.
Arrange
Drag one monitor
icon on top of
the other
3. Drag one monitor icon on top of the other.
8 EPSON PowerLite 9300i Projector
-
System Preferences
or dialog box is
Color LCD
) tab.
Arrangement
Select the
VGA Display
dialog box
checkbox is selected.
, then click
Control Panels
.
Click here
If the Arrange option isn't available, you may need to select
one of the Simulscan resolution settings:
1. Click the
, then
Click here
2. Select a
seconds for the projector to sync up after making the
selection.)

Adjusting the Image

Once you see your image, you may need to make certain
adjustments.

Focusing and Zooming Your Image

Use the
Focus
projector) to sharpen the image.
Use the
Zoom
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
buttons on the remote control to zoom in on a
E-Zoom
portion of the image.
Note: The Focus and Zoom buttons won't work when the wide-
angle rear projection lens is installed.
10/03
icon.
Monitor
resolution as shown. (Allow a few
Simulscan
buttons on the remote control (or on the
buttons to reduce or enlarge the image.
Focus Zoom
Select a
Simulscan
resolution