Resetting The Lamp Timer - Epson PowerLite 822 User Manual

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear the
warning message. Follow these steps:
Replace the Lamp
1. Connect the power cable and turn on the projector.
2. Press the button on the remote control or projector and
Menu
select the menu. Then press
Reset
3. Select
Reset Lamp Hours
confirmation screen.
4. Select and press
Yes
5. Press to return to the main menu or the
Esc
the menu system.
.
Enter
and press . You see a
Enter
.
Enter
button to exit
Menu
Maintenance and Transportation
note
Do not reset the lamp timer if
you have not replaced the
lamp. If you do, the Lamp
Hours will not accurately
reflect the number of hours
that the lamp has been used.
77