Using A Browser To Monitor The Projector - Epson PowerLite 822 User Manual

Using a Browser to Monitor the
Projector
If your projector is connected to a network, you can use a standard
web browser to monitor and control it. When using a browser to
access the projector, you cannot connect through a proxy server.
1. Make sure that the projector is connected to your network, as
described on page 93.
2. Follow the instructions on page 58 to set
in the Extended menu so you can monitor the
Network On
projector in standby mode.
3. Open your web browser and enter the IP address of the projector
you want to monitor in the browser window.
If you're not sure what the address of the projector is, turn the
projector on and select
display the IP address of the projector. See page 94.
You see a login screen.
4. Do one of the following:
■ If you didn't set a Web Control Password in the Network
menu, click
OK
If you set a Web Control password in the Network menu,
■
enter it in the
You see a screen displaying the settings you can change.
5. Select one of the menu options, then change any settings as
needed. These settings correspond to those found in the
projector's menu system. See page 50 for details.
You cannot change the
settings in the Extended menu or select the
Language
in the Reset menu
Reset Lamp Hours
Use the controls at the bottom of the screen to choose a source, stop
the action, turn off the picture and sound, or turn the projector's
power on or off.
from the Network menu to
Wired LAN
.
box, then click
Password
,
User's Logo High Altitude Mode
to
Standby Mode
.
OK
, and
and
Reset All
Monitoring the Projector Over a Network
101