Table of Contents
Advertisement
Operation
Operating Your CB Radio
Intro
Operation
Customer
Assistance
Selecting a Channel
Channel Selection
1. Push and release the Channel knob.
n
i o
a t
e r
p
O
o
t r
I n
2. Rotate the channel knob left or right to select the channel.
Customer
Installation
Assistance
3. Push and release the channel knob to save the setting.
Secondary Icons
s
n
o
I c
n
a i
M
Signal Strength Meter
S/RF Power Meter
Notice
Caution
The Signal Strength Meter indicates the received signal strength
from the antenna. The meter segments shown on the LCD increase
with signal strength.
TX Indicator
TX Indicator
The TX Indicator appears when in transmit mode. In this mode,
the meter shows all bars at full output power.
Channel Frequency
Channel Frequency
Displays the current channel and receive transmit frequency.
Enable/Disable VOX
VOX
1. Push and hold the Push-To-Talk switch on the microphone, then
2. Push and release the MENU button.
3. This will both enable/disable the VOX function.
English
8
Warranty
Warning
Main Icons
Operation
Customer
Installation
Assistance
Operating Your CB Radio
Intro
Operation
Customer
Assistance
Menu Options
Selecting the Menu
Selecting the Menu
1. Push and release the MENU button to access menu options
Customer
Installation
Assistance
n
i o
a t
e r
p
O
o
t r
I n
(see menu options in the Table below).
Secondary Icons
2. Rotate knob to select Menu Option
3. Push and release knob on selected option, then
rotate knob to desired setting and push knob again
to save setting
Notice
Caution
LCD Display
Function
KEY BP
Beep
ROG BP
Roger Beep Sound Setting oF, Tone settings 01 - 06
(Tones)
VOX L
VOX Sensitivity Level Setting Level: 01 - 09
VOX T
VOX Delay Time Setting
RF.GAIN
RF Gain Control
TOTSET
Time Out Timer
PWRAUTO
Automatic Power On Setting on (default): Auto power on
FW VER
Firmware Version
RESET
See Reset to Factory
Default Section
Warranty
Warning
Setting
on (default): turn on beep
oF: turn off beep
oF: (default) turn off
roger beep
Default: 03
Level: 01 - 09
Default: 01
Levels: 03, 06, 09 - 48
oF (default) RF gain off
oF, 01 - 10 minutes
Default: 05
oF: Manual power on
Displays 2-digit
Firmware Version
9
- Quick Links:
- Menu Options
Hide quick links:
Advertisement
Table of Contents
