Inflation Using The 12 Volt Dc Power Cord; Deflation; Deflation Using The 12 Volt Dc Power Cord - Intex Quick-Fill AP642 Owner's Manual

INFLATION
When inflating large items such as inflatable boats and large air mattresses,
no accessory nozzle (FIG. 6) may be needed. The air pumps inflation connector
may fit directly into the inflation valve. If a nozzle is needed, use the air pump
nozzle most appropriately sized for the product, then follow the instructions below:

Inflation using the 12 Volt DC power cord:

1. Plug the 12 Volt DC power cord into the air pump power receptacle (FIG. 5).
2. Attach the DC power cord plug into a standard 12 Volt DC automobile cigarette lighter or accessory outlet (FIG. 5).
3. Attach the air pump inflation connector with nozzle if appropriate to the inflation valve on the item to be inflated (FIG. 7).
4. Slide the switch to " " position to operate the air pump (FIG. 8). Inflate item to desired level.
5. When the item is inflated, slide the switch to "
pump and cords when air pump is not in use.
Inflation using the air pump when fully charged (without power cord):
1. Attach the air pump inflation connector with nozzle if appropriate to the inflation valve on the item
to be inflated.
" position to operate the air pump (FIG. 9). Inflate item to desired level.
2. Slide the switch to "
3. When the item is inflated, slide the switch to "

DEFLATION

Deflation using the 12 Volt DC power cord:

1. Follow steps 1 & 2 under DC power inflation instructions.
2. Attach the air pump deflation connector with nozzle if appropriate
to the deflation valve on the item to be deflated (FIG. 10).
3. Slide the switch to " " position to operate the air pump. Deflate item to desired level.
4. When the item is deflated, slide the switch to "
pump and remove the cord when air pump is not in use.
Deflation using the air pump when fully charged (without power cord):
1. Attach the air pump deflation connector with nozzle if appropriate into the deflation valve on the item to be deflated.
2. Slide the switch to " " position to operate the air pump. Deflate item to desired level.
3. When the item is deflated, slide the switch to "
©2019 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los derechos
reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex
Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union
by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705
RR Roosendaal – The Netherlands
www.intexcorp.com
SAVE THESE INSTRUCTIONS
(166IO) AP642 ELECTRIC PUMP ENGLISH 4.875" X 7.25" 05/23/2019
" position to turn off the air pump (FIG. 3). Immediately unplug air
OR
FIG (7)
" position to turn off the air pump.
" position to turn off the air pump (FIG. 3). Immediately unplug air
" position to turn off the air pump.
Page 4
166
IO
FIG (6)
FIG (8)
FIG (9)
FIG (10)