Adjusting The Graphic Equalizer And Storing The Personal File; Selecting The Cinema Space Effect - Sony MHC-RV7 Operating Instructions Manual

Adjusting the graphic
equalizer and storing the
personal file
You can adjust the sound by raising or
lowering the level of specific frequency band,
then store up to three personal files (P FILE) in
the memory.
Before operation, select the preset effect you
want for your basic sound.
1
Press b or B repeatedly to select a
frequency band or cinema space, then
press v or V to adjust the level or
select the cinema space effect.
Frequency band Frequency level
2
Press and hold P FILE until the
personal file number appears in the
display.
3
Press v or V or B or b to select the
personal file number (P FILE) where
you want to store the equalizer setting.
4
Press ENTER.
The setting is automatically stored as the
personal file you selected in step 3. The
previous setting stored at this memory
location is erased and replaced by the new
setting.
To call up the personal file
Press P FILE repeatedly until the personal file
number you want appears in the display.
Tip
If you do not want to store a personal file, press
ENTER after step 1.
Selecting the cinema
space effect
Press CINEMA SPACE.
Each time you press the button, the display
changes cyclically as follows:
C.SPACE LOW t C.SPACE MID
t C.SPACE HIGH t C.SPACE OFF
Note
When you choose other sound effects, the cinema
space effect may be cancelled.
MHC-RV7 4-240-085-11 (1)
GB
23