Table of Contents
Advertisement
Playing a disc with MP3 files
(continued)
Other Operations
To
Stop playback
Pause playback
Select a file
*1
Select a folder
*2
Find a point in a file
Select a disc when
playback is stopped
Switch to CD function
from another source
Play repeatedly
(Repeat Play)
Cancel Repeat
Play
Exchange other discs
while playing
Remove the disc
GB
14
Do this
Press x.
Press X.
Press again to resume
playback.
During playback or pause,
press > (to go forward)
or . (to go backward).
Press ALBUM +/– after step
2.
There are two type of
searching:
1 Manual Search
During playback, turn
SHUTTLE clockwise (to go
forward) or counter
clockwise (to go backward)
until it clicks and hold it.
Release SHUTTLE when
you reach the point you
want.
2 Lock Search
During playback, press m
or M on the remote. Press
hH to stop searching and
start playback at the point
you want.
Press one of the DISC 1~3
buttons (except SHUFFLE
ALL DISCS mode) or DISC
SKIP EX-CHANGE (or
D. SKIP on the remote).
Press CD or one of the DISC
1~3 buttons (Automatic
Source Selection).
Press REPEAT repeatedly to
*3
select "REPEAT"
or
*4
"REPEAT 1"
.
Press REPEAT until
"REPEAT" or "REPEAT 1"
disappears from the display.
Press DISC SKIP
EX-CHANGE.
Press OPEN/CLOSE Z.
*1
You cannot select a folder during SHUFFLE ALL
DISCS and SHUFFLE 1 DISC.
*2
The search function works only for currently
playing MP3 file. Searching for a point over two or
more MP3 files is therefore not possible.
Furthermore, the playing time may not be displayed
correctly depending on the MP3 file.
*3
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*4
To repeat the current track you are playing.
Tips
• To select a file number using the remote, press
numeric buttons after step 3.
Example:
If the folder contains 100 files or more, to play file
number 100, press >10, then 1, and 10/0 twice.
• Pressing the CD while the power is off
automatically turns the power on and CD is selected
as the function (except for Power Saving Mode).
Notes
• With formats other than ISO 9660, folder names or
file names may not be displayed correctly.
• When naming, be sure to add the file extension
".MP3" to the file name.
• If you save up the extension ".MP3" to a file other
than MP3 files, the unit cannot recognize the file
properly and will generate random noise that could
damage your speakers.
• You are recommended not to save another types of
files or unneccessary folders on a disc that has MP3
files.
• The disc recorded with complicated tree
structure take longer time to start playback.
• When the disc is inserted, the player reads all the
files in that disc. If there are many folders or non
MP3 files on the disc, it may takes longer time for
playback to begin or for next MP3 files to start
playback.
• A folder that does not include an MP3 file is
skipped.
• Maximum folder number: 255 (The maximum
number of MP3 files and folders that can be
contained on a single disc is 512.)
• Playback is possible up to 8 levels.
• Playback follows the recorded order of folders and
files on a disc.
• There may be an exception to these rules depending
on a disc.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 file is recorded, you may encounter
problem such as cannot playback, sounds
interruptions, and noise.
MHC-RV7 4-240-085-11 (1)
Advertisement
Table of Contents
